Recently, I stumbled into a real find at a garage sale. Barb and I were out looking at people’s junk and there it was a ugly painted saw that was done for the owner. I might like landscapes, but what I observed was a nice saw handle and saw plate with almost no wear. So for $3 I took it home and it sat on my drafting table as a painted saw for months.

A couple months later I had gotten sufficiently tired of the oil painting on it and it found itself in the garage being subjected to paint stripper. The stripper took off the painted scene and I soon noticed an etch from the manufacturer on the blade, HSB and Co. and it got more exciting. The painter had the blade sandblasted to remove rust, but the etch was still visible and the blade looked great. Some of the sandblasting work had damaged the handle too, but it wasn’t severe. I felt very fortunate here.

So here is the good news, I rescued from the painters brush a perfectly good saw that had very little use from its owner. The previous owner liked this premium Chicago made saw so much that his name H.M. Simpson was stamped all over the handle, but fortunately for me there is much life left in the saw plate.

After I removed the fall landscape scene and the flat black paint on the back side, I knew I was on the right track. I carefully removed the sandblasting texture from the plate with 220 sandpaper attached to a sanding block. The sanding block helped keep me above the etch and so I could preserve it for some future treatments to darken it. The apple handle was cleaned up of stray paint and then lightly sanded. To even out the color I applied a maple dye, gave it a good coat of boiled linseed oil, added 2 coats of garnet shellac, and then applied wax.

The saw nuts were originally nickel plated and most of that was lost in cleaning it up. I was able to preserve the nickel plating on the medalion.

I am thrilled with the condition of this handsaw, the way it cleaned up, and I can’t wait to sharpen this up and use it.

Thanks for looking!
Jim

Here is the before and what the plane looks like afterward. I cut a few curls on it and it brought smiles after all the effort of repainting, cleaning the parts of rust, polishing the brass, and the equipping the plane with a new IBC A2 steel plane blade. Thanks for looking.

Jim's customized shaving horse

Here is a picture of my customized shaving horse. This is what I now use to make long tapered spindles, initially hand split oak from logs, for the backs of Windsor chairs. This particular shaving horse was made in the early 80′s when I really started to get into traditional woodworking using mostly hand tooks. Believe it or not, I made this shaving horse out of glued up wood recovered from oak pallets and a couple 2″ pine boards I purchased from a local lumber supplier. Initially, this shaving horse design was utilized by coopers to shape barrel staves, and I ended up using it to make Shaker ladderback chair parts. One of the limitations I experienced was that I had to always apply a very firm amount of foot pressure to secure the stock while I was using a drawknife and spokeshave.

After making Windsor chairs for the last several years, I finally realized the need for enhanced holding capability in this shaving horse. It was either that or make another one. Since I don’t have room for more than one shaving horse, I opted to modify this one. An article in Fine Woodworking Magazine, #139, featured a shaving horse designed by chair maker Brian Boggs, it helped me see how this could be done. So I borrowed some design concepts from Brian Boggs. I modified the clamping head by removing the top member which was held originally together with a thru mortise and tenon joint. I replaced the original top member with a 2-1/2″ diameter cylinder with 7/8″ round tenon ends. The round tenons extend all the way through the side arms and this allows the top member, which is now covered with rawhide, to turn and provide fresh clamping surfaces. The pressure I now apply between the rough rawhide covered top clamping member and the rawhide covered grooved platform should provide a much better grip when I am using the drawknife and the spokeshave to work chair spindles.

Thanks for looking!

Jim's Customized Shaving Horse

4 foot long shooting board

three shooting boards

Last year, I read an article by Mike Dunbar in Popular Woodworking and it featured the benefits of making and using shooting boards. As someone who takes chairmaking classes with Mike at the Windsor Institute in Hampton, New Hamsphire, I have grown to really appreciate his woodworking talents as well as his humor. Suffice it to say that Mike’s article gave me the jump start that I needed after being a woodworker for many years. I think it also coincided with me selling my chop saw when I moved and my decision to restore an old Stanley 360 Miter box with saw. You see I had been aware of the benefits of using shooting boards ever since I bought Charles Hayward’s book on cabinetmaking back in the early 80′s, but it took someone else to motivate me to make some shooting boards and to appreciate the difference that they can make in enhancing ones woodworking skill. So between Mike’s article and all the posts and threads on the Neander section of Sawmill Creek Woodworking Forum, it was about time that I got with the program and made some shooting boards. Well thank God that time has arrived!

I guess some background on my love of using hand tools is in order. While I have been into using wood planes for years, I don’t have a good answer for why I didn’t get into making or using shooting boards. Maybe I thought that using a plane the proper way and keeping good technique was enough to give me edges that were 90 degrees to the board surfaces. I don’t know. What I can say is that I bought my first stanley #4 plane, painted in blue and red, when I was mowing lawns back in the mid 60′s. But it was in the late 70′s and early 80′s that I watched the Woodwright’s Shop with Roy Underhill and soon got fired up about buying and restoring old woodern planes. Since then I have been blessed to use a variety of wooden and metal planes and they are an integral part of how I build handmade furniture.

So last year I made three shooting boards and I have quickly discovered that they are awesome to use, both for trimming end grain and long grain. Since I don’t own a chop saw, I can cut a miter on a piece of trim on my Stanley 360 miter box and then plane it fit with the shooting board for mitered joints. Instead of struggling to get edges that are straight for say a drawer, I can also get them to be at 90 degrees to the board face. That is way cool and it helps make me a better woodworker/furniture maker.

Here is another thing, I followed Mike’s advice about the benefits of using a dedicated Bedrock 605 plane for shooting. They are hard to locate, but you can still find them if you are on Ebay or in antique stores. I bought one in an antique store and I spent some time cleaning it, draw filing out a high spot just behind the throat, and then flattening the sole on a 3 foot long piece of 3/8″ thick glass with 80 and 120 grit sandpaper on it. I soon realized the need to draw file the one side to get it at 90 degrees as well. It just took some unrushed time of filing, sanding and checking the edges with a precision straight edge and a couple machinist squares. I also upgraded the plane with a Hock Replacement iron in A2 steel and a thicker cap iron, which enhanced its capabilities too.

Lee Valley Low Angle Jack Plane

It gets better. Recently, Barb and I made it to the Woodworkers Show that was held in Columbus, Ohio at the Expo Center. I have been a fan of Lie-Nielsen planes for years, but heh the Lee Valley booth at the show gave me the opportunity to test drive a Low Angle Jack Plane (LV LA Jack) and boy was I ever impressed. Make no mistake, I think, like most neanders, that Lie-Nielsen and Lee Valley make great tools. Yet this time I was taken by the heft and the feel of the Lee Valley Veritas plane and I love using it. It might be my favorite woodworking plane and now that I have shooting boards, it is mighty cool to use. Thanks for listening to me ramble, but heh woodworking is in my blood and it gives me a great escape from the pressures of caring for my flock. If you want to see me use the LV LA jack on a shooting board, I put together a quick video on Youtube and you can see it here

God bless you!

This was a fun project that I worked on for a couple months once I got the new workshop squared away. I used a mitre box like this back in my High School days in woodshop class. I bought this Stanley 360 mitre box with the saw on ebay before they got real expensive. After trying it out, I am mighty glad I sold my Craftsman Power Mitre box when we made our big move last Spring.

When I bought the mitre box and saw, they were rusty, but thankfully all the parts were pretty much there. After cleaning, putting on some new paint, adding a new poplar top and reconditioning the saw I can say that this is a sweet tool.

I promised Barb that I’d get back to building some Windsor chairs and other furniture now that this project is completed.

Hope you enjoy the pictures.

Take care,
Jim

18th Century Campaign Style Folding Table

Top dyed antique cherry and sealed with polyurethane

Hi everyone. Here are some pictures of the 18th Century Campaign Table that I recently finished. It turned out quite well with the antique cherry stain, polyurethane coating on the top and the lexington green milk paint on the aprons and legs. I’ve learned a lot in making this project and hope to refine the leg profile design and the latching mechanism for securing the leg and apron assemblies. All in all, I am pleased that the design has the look of an 18th century piece, achieved the lightness sought by my client, and can be folded up easily for trips to reenactments.

Take care,
Jim

Side View of 18th Century Style Folding Table

Front view showing the apron design

Table is partially folded up to show the design.

Underside of the folding table showing the locking mechanism.

I built the lathe several years ago and use it to demonstrate how Windsor chair legs could be turned using this primitive technology. It was fun to wear colonial garb and to teach children and adults about using a foot powered lathe. I’m wearing a red waistcoat (vest).

God Bless,
Jim

18th Century Campaign Table

Here is an 18th century campaign style table that I recently designed and built. I constructed it with cherry that was harvested in Upstate New York and utilized birch plywood for the top. I have always been fascinated with the 18th century campaign furniture style and a customed re-enactor asked me to make this for her. My wife has already put in her order and many people took a liking to it at Herkimer Home Historical Site where Barb and I did demonstrations on October 4th.

Here is some information on the project. I choose plywood for the top out a desire for stability, less weight, and ease of construction. With the exception of the plywood top which I dressed up with cherry edging, I sought to make the piece look 18th century as much as possible. I attached the cherry edging with hide glue and cut nails. I built the leg assemblies out of solid cherry and utilized mortise and tenon joinery. Tenons were then pegged. Keeping with the tradition of campaign furniture possessing portability yet remaining good looking, I added complimentary aprons with some decorative details on the long sides. To give the piece sufficient robustness, I attached the long aprons to the top with chiseled out screwing pockets. I utilized flathead screws in those pockets along with hide glue to fasten down the aprons. To anchor the ends of the long aprons, I utilized a combination of glue blocks and corner braces. Legs were turned on the lathe using cherry blanks that were 2 1/2″ square. After much searching, I choose this leg profile as being appropriate for an 18th century style campaign table.

Making the leg assemblies fold up was more effort than I had first realized. My design utilized a combination of 2″ barrel bolts at the points where the glue blocks are attached and 9/16″ diameter hardwood pins at the opposite leg ends. This was how I managed to lock the aprons. The table folds up nicely and yet has the stability that makes this an attractive and useful piece of furniture for 18th century re-enactors and homeowners.

I hope you enjoy the picture and please feel free to leave a comment if you also make British style campaign tables.

God bless,
Jim

Photo by Dan Paulson

Hi,
Barb and I have an even nicer website now at www.chairsbypaulson.com. Not only do we have some extra cool photos that were taken by our son Dan, but we have added Paypal.

As a small shop, Paypal offers us a way to help people make a deposit on a Windsor chair so they can get on our chair making schedule. We are hoping that this will make it easier for our customers to put a handmade Windsor chair in their home. It is easy to love these chairs once you see them up close, admire the craftsmanship, remember the history of our country in the late 1700s, and most of all when you sit in one of them and just feel the quality.

We are hooked on making Windsor chairs, one at a time, and we hope that our joy in making a fine chair can be a blessing for you.

Handmade Windsor Chairmaker's Bowsaw

I have always enjoyed using hand tools and occasionally I’ll decide to try my hand at making my own tools. Here is my first Windsor chair maker’s bowsaw. My design reflects the work of J. Crate Larkin who was published in Fine Woodworking Magazine issue #151. However, I incorporated a number of modifications concerning saw size, handle and blade assembly aspects. This bowsaw project gave me an excuse to work with tiger maple, 3/8″ brass rod, copper end caps, and to salvage some maple scraps from turning Windsor chair legs. In contrast with Larkin’s saw, I scaled this design up for use in Windsor chair making work. My saw sports a 27 1/2 inch long blade which is narrow (3/8 inch wide). This is designed for cutting curves. Occasionally, Barb and I do demonstrations at the General Herkimer Home Historical site in Little Falls, NY, and this will be used to cut chair seats. Since this is my prototype, I’ll incorporate some refinements in any subsequent saws. Hopefully, I’ll offer some for sale in the near future for those who appreciate quality and beauty in a hand made woodworking tool. This saw works great in my hand and is a beautiful tool to hang on the wall until it is needed the next time.

bowsaw arm/handle detail

bowsaw arm angle view